|
Product Details:
|
| Tolerance: | Zinc Coating | Width: | 600 - 1250MM |
|---|---|---|---|
| Zinc Coating: | Z30 - 600g/㎡ | Type: | GI Steel Coil |
| Grade: | SGCC,DX51D,SGCC/DX51D/DX52D/DX53D | Thickness: | 0.12-3MM |
| Standard: | JIS, JIS G3321/ASTM A792 | ||
| High Light: | Zero Spangle Z275 GI Steel Coil,Z275 GI Steel Coil 600mm,1250mm Cold Rolled Galvanized Steel Coil |
||
Zero Spangle Z275 Galvanized Coil Galvanized Steel Sheet Roll Gi Cold Rolled
About Gi Steel Coil Product Application General Knowledge
Galvanized coil is inferior to the former in terms of weldability, coating properties and formability. For a long time, the stamping formability, spot weldability and surface quality of galvanized GI steel sheets for automobiles have been a problem, which also limits its application in automobile outer panels. Automotive assembly requires 3000-4000 solder joints. Compared with ordinary cold plate, the electrode life of hot-dip galvanized sheet welding is lower, that is, the number of consecutive spot welding of the same electrode is less.
However, with the development of new technology and new steel grades of hot-dip galvanizing and the improvement of equipment level, the defects of hot-dip galvanized sheet have been greatly improved, so it is more and more used in the field of automobile manufacturing. On the other hand, the zinc material on the entire surface of the galvanized layer is also very demanding in its own right, since this method is used to obtain high corrosion resistance. At this time, its corrosion resistance is naturally its performance, but at this time, due to different manufacturers, it will have its own differences in corrosion resistance.
There is another aspect about the role of the automotive sector, that is, in terms of its own surface material, it should also achieve good aesthetics, since it is outside the material, it will inevitably be achieve a high aesthetic effect.
The automobile surface treatment plate should not only have good corrosion resistance, but also meet the performance requirements of stamping formability, weldability, passivation treatment and coating. In North America, heavy-coated galvanized steel sheets are mainly used. In Japan, in addition to ethylene glycol steel sheet, more automobile factories use alloy hot-dip galvanized steel sheet.
| Thickness | 0.105- 4MM |
| Width | 600 - 1250MM |
| Length | As require |
| Zinc Coating | Z30 - 600g/㎡ |
| ID of Coil | 508/610MM |
| Surface Structure | Regular spangle,Minimum spangle, Zero spangle, Big spangle |
| HRB | Soft Hard (＜60),Medium Hard (60-85), Full Hard (85-95) |
| Surface Treatment | Oiled (O), Chromium (C),Phosphating (P), Spinpass |
| Standard Seaworthy Export Packing | Dust-proof kraft sheet, iron packing, Angle protective, packing belt |
| Coil Weight | 3-5 Tons |
| Standard | ASTM-A653; JIS G3302; EN10147;etc |
| Payment Terms | T/T, LC, Western Union, Paypal, O/A, DP |
| Regular Order | 25 tons or one container, for less quantity, to contact with us for details. |
FAQ
Q2: How long does it take to get the product if I place an order?
A2: With the process of your requirements, we will pack and deliver in 3-7 days. If it is by sea shipment, it will take 15-45 days depending on different locations.
Q3: How about samples?
A3: free
Q4: Minimum order quantity?
A4: MOQ is 1 tons.
Q5: What kind of terms of payment?
A5: T/T, L/C, Western Union,PayPal are available.
Q6: Can you do customization & reproduction if I provide a photo?
A6: Yes.
Contact Person: Elina
Tel: 17669729703
Fax: 86-0532-87961221
